HPUX socket[7]

 socket(7)                                                         socket(7)





 NAME
      socket - Interprocess communications

 DESCRIPTION
      Sockets are communication endpoints that allow processes to
      communicate either locally or remotely.  They are accessed by means of
      a set of system calls (see socket(2)).

      The following ioctl() requests are defined in <sys/ioctl.h> (see
      ioctl(2)):

      FIOSNBIO       If the int with the address arg is non-zero, the socket
                     is put into non-blocking mode.  Otherwise, the socket
                     is put into blocking mode.  Blocking mode is the
                     default.  The FIONBIO request is equivalent to the
                     FIOSNBIO request, although using FIONBIO is not
                     recommended.  See accept(2), connect(2), recv(2), and
                     send(2) for an explanation of how non-blocking mode is
                     used.

      FIONREAD       For SOCK_STREAM sockets, the number of bytes currently
                     readable from this socket is returned in the integer
                     with the address arg.  For SOCK_DGRAM sockets, the
                     number of bytes currently readable, plus the size of
                     the sockaddr structure (defined in <sys/socket.h>), is
                     returned in the integer with the address arg.

      SIOCATMARK     For SOCK_STREAM TCP sockets, on return the integer with
                     the address arg is non-zero if the inbound TCP stream
                     has been read up to where the out-of-band data byte
                     starts; otherwise the inbound TCP stream has not yet
                     been read up to where the out-of-band data byte starts.
                     For sockets other than SOCK_STREAM TCP sockets, on
                     return the integer with the address arg is always zero.

      SIOCSPGRP      This request sets the process group or process ID
                     associated with the socket to be the value of the
                     integer with the address arg.  A process group or
                     process ID associated with the socket in this manner is
                     signaled when the state of the socket changes: SIGURG
                     is delivered upon the receipt of out-of-band data;
                     SIGIO is delivered if the socket is asynchronous, as
                     described in FIOASYNC below.  If the value of the
                     integer with the address arg is positive, the signal is
                     sent to the process whose process ID matches the value
                     specified.  If the value is negative, the signal is
                     sent to all the processes that have a process group
                     equal to the absolute value of the value specified.  If
                     the value is zero, no signal is sent to any process.
                     It is necesary to issue this request with a non-zero
                     integer value to enable the signal delivery mechanism



 Hewlett-Packard Company            - 1 -     HP-UX Release 9.0: August 1992






 socket(7)                                                         socket(7)





                     described above; the default for the process group or
                     process ID value is zero.

      SIOCGPGRP      This request returns the process group or process ID
                     associated with the socket in the integer with the
                     address arg.  See the explanation for SIOCSPGRP above
                     for more details on the meaning of the integer value
                     returned.

      FIOASYNC       If the integer whose address is arg is non-zero, this
                     request sets the state of the socket as asynchronous.
                     Otherwise, the socket is put into synchronous mode (the
                     default).  Asynchronous mode enables the delivery of
                     the SIGIO signal when:

                          o  New data arrives, or

                          o  For connection-oriented protocols, whenever
                             additional outgoing buffer space becomes
                             available, or when the connection is
                             established or broken.

                     The process group or process ID associated with the
                     socket must be non-zero in order for SIGIO signals to
                     be sent; the signal is delivered according to the
                     semantics of SIOCSPGRP descibed above.

      The fcntl(2) O_NDELAY and O_NONBLOCK flags (defined in <sys/file.h>)
      are supported by sockets.  If the O_NONBLOCK flag is set, the socket
      is put into POSIX-style non-blocking mode.  If the O_NDELAY flag is
      set, the socket is put into non-blocking mode.  Otherwise, the socket
      is put into blocking mode.  Blocking mode is the default.  See
      accept(2), connect(2), recv(2), and send(2) for an explanation of how
      these form of non-blocking mode is used.

      Since both the fcntl() O_NONBLOCK and O_NDELAY flags and ioctl()
      FIOSNBIO requests are supported, some clarification on how these
      features interact is necessary.  If the O_NONBLOCK or O_NDELAY flag
      has been set, recv() and send() requests behave accordingly,
      regardless of any FIOSNBIO requests.  If neither the O_NONBLOCK flag
      nor the O_NDELAY flag has been set, FIOSNBIO requests control the the
      behavior of recv() and send().

 DEPENDENCIES
      This entry describes the use of the TCP protocol as it applies to the
      Berkeley Interprocess Communication utility.  It does not apply to the
      use of TCP for the NetIPC utility.  Refer to the NetIPC Programmer's
      Guide for information about NetIPC.

    AF_CCITT Only
      Only the FIOSNBIO, FIONREAD, SIOCGPGRP, and SIOCSPGRP ioctl() requests



 Hewlett-Packard Company            - 2 -     HP-UX Release 9.0: August 1992






 socket(7)                                                         socket(7)





      are defined for af_ccitt sockets.  See socketx25(7).

 AUTHOR
      socket was developed by the University of California, Berkeley.

 SEE ALSO
      fcntl(2), getsockopt(2), ioctl(2), socket(2), socketx25(7).















































 Hewlett-Packard Company            - 3 -     HP-UX Release 9.0: August 1992